Have Questions? We Have Answers!
Allan Block offers some basic answers to frequently asked questions about retaining walls, concrete fences and courtyard patio walls. Click on a question to see answers relating to your selection. Links throughout the answers will guide you to further information and resources. If you have any further questions, please feel free to post a question on our blog or contact your local AB sales representative.
Allan Block is the premiere source of beautiful, economical outdoor landscaping solutions that improve the appearance and function of any landscape. For more than 25 years, Allan Block has made it easy to plan, design and build small retaining walls. Check out the retaining wall photo gallery and the Outdoor Living by Allan Block book for some great ideas.
Unreinforced Allan Block walls or gravity walls, can be built up to 5 ft high (1.5 m) in sandy soils and up to 3.5 (1.0 m) ft in clay soils. Follow the Allan Block Installation Guide for easy installation instructions. Masonry reinforcement works well for walls up to 15 feet high and geogrid reinforcement can handle walls in excess of 40 feet high. Always consult a qualified Allan Block engineer on jobs of this scale.
No. Allan Block walls are designed to sit on a compacted granular base. This saves time and money, while providing a solid base for the blocks. See the Allan Block Landscape Walls Guide for the recommended depth and width of base for your wall.
Standard concrete building blocks made in the 1950s using a similar process as Allan Block are still performing in building structures around the world. With today’s technological improvements, we believe Allan Block will last a lifetime. Check out our tips on caring for your retaining wall
Yes. Allan Block is made using natural, raw materials. No harmful chemicals, such as those found in treated timbers or railroad ties, are used in manufacturing Allan Block. We are an environmentally friendly concrete product.You should check out our newest retaining wall product - AB Fieldstone
Yes. Although a better question to ask is “how do I avoid cutting the blocks?” Good planning and design, and the use of compatible block sizes during construction not only save time, but also reduce the need to cut block. However, if necessary, Allan Block is just about as easy to cut as timber, with the right tools.
We recommend a masonry cut-off saw with a diamond-tipped blade. These saws operate like chain saws and the blades last. To split blocks yielding a rough cut, you can use a hammer or masonry saw and a chisel. Score the block with a shallow cut on the front and back and snap in two with light blows on the chisel. The break will be a little rougher than making a complete saw cut, but you can still get a good fit. A diamond blade power saw is typically used to give a clean cut.
Allan Block walls are dry-stacked, locking together without pins, clips or mortar. The unique front lip creates a built-in setback, allowing the blocks to automatically interlock as they are stacked. The benefits of the hollow core include built-in drainage and easy to handle and to stack blocks.
Allan Block sets back as it is stacked to improve wall stability and performance. It is designed with an automatic setback of 6 or 12 degrees of “lean” into the hillside. The Allan Block top lip and bottom notch combine to form the automatic setback – no measuring is necessary. Block setback is noted on all Allan Block publications.
Though Allan Block costs vary depending on which block you chose, material costs for Allan Block are competitive with treated wood and stack rock, are less than lannon stone, boulders and other stackable masonry systems, and cost up to 30 percent less than walls requiring concrete footings. The 12-degree setback of an Allan Block wall means less reinforcement is needed compared to more vertical walls. Because Allan Block is so easy to handle and install, it is the most cost-effective retaining wall system available.
Contact your local AB Dealer for a price quote.
Allan Block typically is available through landscape supply dealers or building material outlets. Check out the “Find A Store” locator for specific contact information.
Review information Allan Block Residential Retaining Wall as you consider soils, slopes, surcharges, block style and wall heights in the planning of your small retaining wall project.
Allan Block has a size, weight and style that is right for any landscape. Use the Allan Block Products page to choose the style that best complements your project.
Allan Block walls can be adapted to meet the structural requirements of any retaining wall site. Walls up to 5 ft high (1.5 m) in sandy soils and up to 3.5 ft (1.0 m) in clay soils typically can be installed without any pre-engineered reinforcement. Taller walls can be strengthened using conventional masonry techniques or the AB Reinforcement Grid method. Site and soil conditions determine the maximum height on any project.
Try to start each wall at the lowest point and work up, stepping the blocks up as you build into the slope. It is better to step up the base row than to step it down.
Contact your local building code department to see if a building permit for landscape retaining walls is required in your area.
Yes. The design flexibility of Allan Block makes it the perfect choice for waterfront applications, even in areas where freezing is a concern. Consult your Allan Block dealer or a landscape architect for special considerations when building in water.
Yes. Planting or landscaping in the block cores or behind the blocks is easy and environmentally safe. Allan Block does not leach any harmful chemicals that could affect your plants or shrubs. A drip irrigation system can even be built into the wall during construction.
Yes. Fences can be built into the blocks hollow core or behind the wall. The wall may have to be reinforced to support the wind load from the fence. Consult your Allan Block dealer or a landscape architect for special considerations when building a fence.
The number of blocks needed depends on the unit size of the Allan Block you have chosen and the size of your project. Typically, you can determine this number by first multiplying wall height by wall length to get a square foot area. Next, divide the square foot area by the Allan Block unit size to get a rough estimate of the amount of blocks you will need. Quick estimating guides can be found in Allan Block Landscape Walls Guide, or you can contact your local Allan Block dealer. When estimating, be sure to include outside corners and caps, if they are required for your project.
Allan Block is available in a variety of different weights – from 30 pounds (14kg) to more than 75 pounds (34kg) per unit. Heavier blocks are typically designed for taller walls. Unique to Allan Block is the hollow core making it lighter and easier to lift and stack than traditional concrete block.
Tools required to install Allan Block depend on the size of the job. Small walls may only require basic tools such as a shovel, rake, wheelbarrow, small sledgehammer, 3-inch chisel, level and hand tamper. Larger or more detailed walls may require additional equipment, such as a plate compactor and a diamond blade saw for cutting block. Discuss your project with your local Allan Block dealer for advice on tools and equipment or consult the tool list in the Allan Block Landscape Walls Guide.
Consider style and function as you initiate your landscape wall design. Review the Residential Retaining Wall Guide as you consider stairs, terraces, and finishing details.
From the natural antique appeal of AB Europa, to the marbled color or clean look of the AB Collection, Allan Block has colors and styles that complement any landscape. Check out our retaining wall products and choose the look that's right for your project. Call your local AB Dealer to confirm colors and styles available in your area.
Yes. Stairs can be designed and built using curves or corners in a number of different styles. Check out the Residential Retaining Wall Guide for detailed design and construction details.
Minimum curve radiuses are based on the block size. find your radius size on the Radius Chart.
Terrace walls tame a slope by building two or more low walls rather than one tall wall. Once the lower wall is built, the next wall can be constructed, leaving an area in between the walls for landscaping or planting. Ask Your AB Dealer for design assistance and see Terrace Walls for more design and construction details.
Unique to Allan Block is the raised front lip on the block that provides a perfect edge for landscape mulch, decorative rock or AB capstones. Learn more about finishing options.
A gravity wall is a wall that relies on its own weight to hold up the soil behind it. The weight of the blocks and the granular fill in the block cores, combine to become the weight of the wall.
A reinforced wall is a wall that uses layers of reinforcement grid to tie the blocks and soil behind the blocks together to form a larger and heavier wall.
The need for reinforcement depends on the weight the wall is holding back. See the pre-engineered "Soil Reinforcement Chart" to see if your wall needs reinforcement.
Yes. Lights built into the wall can provide a beautiful ambience to patios or add safety lighting along stairways. Use lighting fixtures designed for outdoor use and follow manufacturers instructions.
After a quick review of your plan, the Residential Retaining Wall Guide, you should be ready to start building your wall. Here is a short checklist: Order materials, gather tools, prepare the site and layout the wall locations and dig the base trench (starting from the lowest point). Follow the step-by-step installation guide and don't hesitate to call your Allan Block Dealer should you have any questions or need some additional help.
- Use a garden hose to layout a smooth curve or as a "water level" to help determine grade changes.
- Use a 3-4-5 triangle to build square from another structure.
- Mark utilities with a wooden stake or paint.
A good base material is a crushed stone ¼" to ¾" in size. This material compacts well and makes it easy to level the base block.
Yes. A compacted base provides a solid foundation to build on and will not allow water to saturate the base material leading to a potential weakening of the base.
Yes. The base blocks need to be leveled back to front and side-to-side.
Partial burying the base block reduces the risk of erosion and potential undermining of the wall due the base being exposed. Bury a minimum of 1" per foot of wall height.
No. "Running bond" refers to a pattern where the seam between any two blocks falls exactly on the center of the block below it. Perfect running bond is not essential for Allan Block walls. We recommend a minimum average offset of 3 inches. You can insert half blocks as needed to help maintain some staggering.
You can use the same material as the base (¼" to ¾" crushed stone) although some contractors prefer to place ¾" clear crushed / angular stone because it is easier to work with.
Backfill every row of block you stack - and check your wall for level at the same time. Backfilling more than one row at a time may cause the wall to lean forward.
AB Reinforcement Grid simply rolls out along the wall. Follow the installation instructions printed on every roll of grid.
Ending a wall into a hillside, stepping down into grade or a combination of both are options to ending a wall. See the AB How-To Series - Finishing Options for some great, pro-finish details.
Outside corners use the Allan Block 90 degree corner units. AB corners come in a pairs of a left and a right hand unit. As the left and right hand units are alternately stacked they form a strong interlock.
Inside corners are formed using standard Allan Block units. Part of the top lip on the blocks is removed so the blocks can alternately over lap on each other to form a strong interlock. See the Residential Retaining Wall Guide for details.
Corner caps are typically miter cut with a saw on the job. Some Allan Block Dealers may offer cutting services or pre-cut corner caps for the convenience of their customers. (Allan Block does not manufacture a "corner cap unit") learn more on how to cut AB capstones.
When it is necessary to cut a block use a saw with a diamond tipped blade. A better question is to ask is "how do I avoid cutting the blocks?" Good planning by way of project design and use different yet compatible sizes during construction is not only a time saver but also a "cut saver".
Generally, Allan Block recommends the use of a licensed engineer on projects with taller walls or unusual site conditions. Local building codes may require the use of a licensed engineer for walls above a certain height. Our design charts and tables provide generalized engineering solutions. Each retaining wall site is unique, however, and specific evaluation will provide the most accurate solution.